squander tyre recycling EPT rubber crumb approach EPT
The EPT tire recycling EPT will be managed by the PLC, all the resources will be process within of EPTs, there is Actual ZERO Pollution. 1 labor, 1 engineer can work all the EPTs, no want to run the EPTs, just manage the PLC. the EPTs can shield the EPTs, work the EPTs and maintain the EPTs function easily.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT adopt PLC computerized management method, with automatic reversal control program in overload issue. Two-shaft tire crusher is EPTly created for outdated tires with minimal pace and substantial torque to decrease sounds and EPT consumption.
The blade of the shredEPTis produced of substantial top quality metal and subjected to Bodycote heat treatment to accomplish the greatest crushing functionality.The shredEPTis effortless to disassemble and alter cutter blade and suitable for tearing huge, added thick and challenging supplies.The thickness range of the crushing blade is 25mm-152mm in accordance to the tire type,output and ultimate product. The grinEPTcan method OTR tires,large truck tires,automobile tires and so on at the speed of 1-30tons whithin 1 hour.
| Design | Enter dimensions | Output size | Cappacity | Motor | Blades amount | Dimensions | Weight |
| TS-800 | 800mm | 50*50mm | 1-2T/h | two*22kw | 16pcs | four*two.six*3.2m | 8T |
| TS-1200 | 1200mm | 60*60mm | 3-5T/h | 2*37kw | 20pcs | 4.8*2.8*3.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | 6-8T/h | two*45kw | 16-30pcs | five*two*three.4m | 18T |
| TS-1800 | 1800mm | fifty-150mm | seven-10T/h | two*55kw | 20-24pcs | five.6*two*three.4m | 23T |
| TS-2000 | 2000mm | seventy five-200mm | 10-15T/h | 2*75kw | twenty-30pcs | 6*2.four*4m | 36T |
| TS-2400 | 2400mm | 100-200mm | twenty-30T/h | 2*110kw | 16-24pcs | 7.4*3.two*five.2m | 56T |
two.Rasper
EPT tire shredding program is created to make up to 6 tons per hour of wire free rubber mulch.This technique generates up to a 99% wire free of charge chip ranging in measurement in between twelve-25mm dependent on the preferred dimension.Right after processing,the steel is taken off by our magnetic separation technique.At this position,the wire cost-free rubber chips are ready to be coloured and utilized for landscaping mulch and the metal is ready to be baled and marketed to smelters.
| Rasper | Motor | EPT | Ability | Dimensions | Weight | Cutting chamber | Closing solution |
| R45 | Siemens | 45KW | 300-500kg/H | 1.4*1.two*two.3m | 1700kg | 450*600mm | ten-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | 1.seven*one.7*2.3m | 1850kg | 450*800mm | 10-30mm |
| R75 | Siemens | 75KW | seven hundred-1T/H | 2*two*4.1m | 3500kg | 550*800mm | ten-30mm |
| R90 | Siemens | 90KW | 1-one.5T/H | 2.one*two.one*four.1m | 4200kg | 550*1000mm | 10-30mm |
| R132 | Siemens | 132KW | 1.5-3T/H | two*2.5*4.1m | 6100kg | 742*1200mm | 10-30mm |
| R315 | Siemens | 315KW | 3-6T/H | 6.2*two.one*three.6m | 12400kg | 697*1562mm | 10-30mm |
three.Granulator EPT
Squander Tire Recycling Rubber Granule Creating EPT is adopting actual physical recycling technique and is designed to grind the rubber mulch from the rasper into tiny granules as good as 1-6mm. The granules are screened and re-circulated until the wanted size is attained. This Completely-Automatic Tyre Recycling Line working in typical temperature, no need to have to add any other chemical substances, no pollution to the setting. This is the ideal way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Potential | 300-500kg/h | 500-800kg/h | 800-1500kg/h |
| Proportions | one.eight*one.6*two.4m | 1.8*1.nine*2.4m | 2.two*two.three*3m |
| Final solution | one-6mm | one-6mm | one-6mm |
four.Miller
Rubber powEPTis the final consequence of ambient tire recycling.At this stage,crumb rubber is floor down into a thoroughly clean powEPTform with practically all metal and fiber eliminated.Rubber powEPThas several secondary uses from injection molding merchandise,coatings,roofing supplies and various asphaltapplications.
Rubber powEPTis typically located in 40-seventy four microns(.40-.74mm) in dimension.This micron dimensions metarial has the benefit of being integrated into new or eXiHu (West Lake) Dis.sting formulations for numerous polymers and completed merchandise.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter product | Weighty obligation truck tyres to bicycle tyres | |||
| Enter size | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output dimensions | shred to 30-one hundred twenty mesh rubber powder | |||
| Capability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Complete Kw | 680-760kw | 516-556kw | 347-372kw | one hundred seventy-190kw |
Mob 151366 0571 6
FAQ:
Q1,Are you a factory or a buying and selling company?
A. We are a producer with 30 a long time creation expertise in tire recycling EPT. We have export license, we can provide you the factory prices.
Q2. Can you ensure the ability as you pointed out ?
A. Definitely sure,besides that,we also provide 3-5years guarantee.
Q3, are you sure the final rubber powEPTcan be totally thoroughly clean out of wire metal or nylon ?
A. The final powEPTpurity can get to ninety nine.9%. we have magnetic separator which can independent the wire steel from the rubber powder.
