Tire Recycling EPT/Crumb Rubber PowEPTMaking Line/Utilised Tyre Recycling EPT Value

1.Primary operating approach

2.Debeader ( oil hydraulic type)

Design: LS-1200

Capacity:20-forty tires/hour

Pulling power(T): 13

Max.tire diameter 1200mm

EPT(KW): seven.5KW

Stroke length: 1300mm

Dimension(L*W*H): three.6*.78*one.02

Fat: 2500KG

3.EPT tire cutter

Model :WTC1200

Potential:20-forty tyres/h

Motor EPT:five.5kw

Tire range:Max 1200mm

Dimension:2080*a thousand*2130mm

four.EPT tyre shredder

Product	ZPS-900	ZPS-1200
Generation capability	one.5-2 Ton/hour	2.5-3 T/h
Measurement of feeding	le900 mm EPT tyre	le1200 mm EPT tyre
Discharging particles	le50*50mm	le60*60mm
Motor powder	sixty kw	a hundred and ten kw
Discharging motor	2.two kw	four kw
Cutter rotate speed	sixteen r/min	31 r/min
Screener rotate speed	six r/min	8 r/min
Dimension (L*W*H)	two.8*two.1*2.4 m	five.two*two.8*3.5 m
Fat	nine.two T	14.8 T

Information :

Knives materials: H3 , Germany stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd, solid, heat remedy by high frequency, some factory only use 45# metal, the Cost is a lot more less costly(only 1/3 of H3 ), but the existence is much more shorter! The daily life of the knives is the most EPTant for the shredder EPT.

5.Closing Merchandise(50x50mm tire blocks):

six.tyre crusher

Variety	XKP-four hundred	XKP-450	XKP-560
Entrance roll diameter(mm)	four hundred	450	560
Rear roll diameter (mm)	four hundred(grove roller)	450 (grove roller)	510 (grove roller)
Doing work size of rolls(mm)	600	650	800
Entrance roll surface speed(m/min)	seventeen.32	23.2	twenty five.fifty six
Friction ratio	1:one.38	one:one.38	1:1.thirty
Max.nip(mm)	eight	eight	fifteen
Manufacturing capacity(kg/h)	two hundred-300	600-800	-1500
Motor EPT(kw)	45	fifty five	seventy five
Total dimension(mm)	3950*1800*1780	4770*1846*1835	5064*2284*1978
Excess weight(kg)	7000	12000	18000

seven.Fiber separator

Capacity:five hundred-1000kg/h

Motor EPT:5.five*two+.75 kw

Dimension:one.5*1.5*three.four(m)

Bodyweight:about 1.5T