waste tire processing line rubber powEPTmaking EPTry
The EPT tire recycling EPT will be managed by the PLC, all the supplies will be approach inside of of EPTs, there is Real ZERO Air pollution. 1 labor, one engineer can function all the EPTs, no want to operate the EPTs, just manage the PLC. the EPTs can shield the EPTs, operate the EPTs and maintain the EPTs perform efficiently.
Specification
one.Tire shredEPTEPT
The Rubber ShredEPTEPT adopt PLC automated manage method, with computerized reversal control system in overload problem. Two-shaft tire crusher is EPTly made for old tires with lower velocity and large torque to reduce noise and EPT intake.
The blade of the shredEPTis created of large good quality steel and subjected to Bodycote heat therapy to attain the very best crushing overall performance.The shredEPTis straightforward to disassemble and alter cutter blade and suited for tearing large, further thick and difficult components.The thickness assortment of the crushing blade is 25mm-152mm in accordance to the tire variety,output and closing merchandise. The grinEPTcan procedure OTR tires,big truck tires,car tires and so on at the pace of one-30tons whithin one hour.
| Design | Enter measurement | Output dimensions | Cappacity | Motor | Blades amount | Dimensions | Weight |
| TS-800 | 800mm | 50*50mm | one-2T/h | two*22kw | 16pcs | four*2.six*3.2m | 8T |
| TS-1200 | 1200mm | 60*60mm | three-5T/h | two*37kw | 20pcs | 4.eight*two.8*3.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | six-8T/h | 2*45kw | 16-30pcs | five*2*3.4m | 18T |
| TS-1800 | 1800mm | 50-150mm | 7-10T/h | 2*55kw | twenty-24pcs | five.six*two*three.4m | 23T |
| TS-2000 | 2000mm | 75-200mm | 10-15T/h | two*75kw | twenty-30pcs | 6*2.4*4m | 36T |
| TS-2400 | 2400mm | one hundred-200mm | 20-30T/h | two*110kw | sixteen-24pcs | seven.4*three.2*five.2m | 56T |
2.Rasper
EPT tire shredding program is made to make up to six tons for every hour of wire cost-free rubber mulch.This technique generates up to a ninety nine% wire free of charge chip ranging in size amongst 12-25mm relying on the sought after dimension.Soon after processing,the steel is eliminated by our magnetic separation technique.At this point,the wire cost-free rubber chips are prepared to be coloured and utilised for landscaping mulch and the metal is completely ready to be baled and offered to smelters.
| Rasper | Motor | EPT | Capacity | Dimensions | Excess weight | Slicing chamber | Ultimate solution |
| R45 | Siemens | 45KW | 300-500kg/H | 1.4*one.2*2.3m | 1700kg | 450*600mm | 10-30mm |
| R55 | Siemens | 55KW | five hundred-700kg/H | 1.seven*one.seven*2.3m | 1850kg | 450*800mm | 10-30mm |
| R75 | Siemens | 75KW | 700-1T/H | 2*two*4.1m | 3500kg | 550*800mm | ten-30mm |
| R90 | Siemens | 90KW | one-one.5T/H | 2.one*two.one*4.1m | 4200kg | 550*1000mm | 10-30mm |
| R132 | Siemens | 132KW | 1.5-3T/H | two*2.five*4.1m | 6100kg | 742*1200mm | 10-30mm |
| R315 | Siemens | 315KW | three-6T/H | six.2*two.1*three.6m | 12400kg | 697*1562mm | ten-30mm |
three.Granulator EPT
Squander Tire Recycling Rubber Granule Creating EPT is adopting actual physical recycling approach and is designed to grind the rubber mulch from the rasper into small granules as fantastic as one-6mm. The granules are screened and re-circulated right up until the sought after dimensions is attained. This Fully-Automatic Tyre Recycling Line operating in regular temperature, no need to incorporate any other chemicals, no pollution to the environment. This is the best way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Capacity | 300-500kg/h | five hundred-800kg/h | 800-1500kg/h |
| Proportions | 1.eight*one.6*two.4m | one.8*1.nine*two.4m | two.two*2.3*3m |
| Ultimate merchandise | one-6mm | one-6mm | one-6mm |
4.Miller
Rubber powEPTis the ultimate result of ambient tire recycling.At this stage,crumb rubber is ground down into a clear powEPTform with practically all metal and fiber removed.Rubber powEPThas many secondary utilizes from injection molding products,coatings,roofing materials and a variety of asphaltapplications.
Rubber powEPTis generally discovered in 40-74 microns(.40-.74mm) in measurement.This micron size metarial has the gain of becoming incorporated into new or eXiHu (West Lake) Dis.sting formulations for various polymers and finished products.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter solution | Hefty responsibility truck tyres to bicycle tyres | |||
| Input dimensions | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output size | shred to 30-120 mesh rubber powder | |||
| Ability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Complete Kw | 680-760kw | 516-556kw | 347-372kw | 170-190kw |
Mob 151366 0571 six
FAQ:
Q1,Are you a manufacturing facility or a buying and selling business?
A. We are a manufacturer with thirty many years production encounter in tire recycling EPT. We have export license, we can offer you you the manufacturing unit charges.
Q2. Can you promise the potential as you mentioned ?
A. Undoubtedly sure,apart from that,we also offer 3-5years warranty.
Q3, are you positive the last rubber powEPTcan be entirely clear out of wire steel or nylon ?
A. The final powEPTpurity can get to ninety nine.nine%. we have magnetic separator which can separate the wire metal from the rubber powder.
